High flow temperatures up to 73°C- Low noise and anti-vibration design
- Traditional cooling/heating function with buffer cylinder
Key Benefits
- Reliable technology and straightforward operation
- Remote monitoring and communication available
- Meets hygiene regulations for DHW heating
Key Benefits
- High flow temperatures up to 73°C
- Low noise and anti-vibration design
- Traditional cooling/heating function with buffer cylinder
- Reliable technology and straightforward operation
- Remote monitoring and communication available
- Meets hygiene regulations for DHW heating
DHW heated in compliance with hygiene standards
Vitocal 350-G Pro achieves high flow temperatures of up to 73°C, thus meeting the requirements of hygiene regulations for DHW heating. The special temperature maintaining facility guarantees hot inlet temperatures downstream of the loading system at all times, even during the loading cycle.
DHW heated in compliance with hygiene standards
Vitocal 350-G Pro achieves high flow temperatures of up to 73°C, thus meeting the requirements of hygiene regulations for DHW heating. The special temperature maintaining facility guarantees hot inlet temperatures downstream of the loading system at all times, even during the loading cycle.
Remote monitoring and communication
The control unit boasts numerous communication options, from a simple analogue modem to a LAN-supported system. Use of Modbus technology and Bacnet is also possible. This makes the system accessible for remote maintenance over the internet, for example. It can also be integrated quickly into existing building management systems.
Remote monitoring and communication
The control unit boasts numerous communication options, from a simple analogue modem to a LAN-supported system. Use of Modbus technology and Bacnet is also possible. This makes the system accessible for remote maintenance over the internet, for example. It can also be integrated quickly into existing building management systems.
Efficient cooling
In cooling mode, the control unit decides whether the waste heat can be utilised for DHW heating and/or for charging the heating water buffer cylinder. If not, the waste heat is used to reheat the ground loop or is discharged to the outdoor air via a dry cooler.
Pre-assembled electrical equipment
The electrical equipment is already integrated inside the heat pump casing as standard. Factory-fitted contactors for fail-safe primary and secondary pumps, as well as protection for the compressor, guarantee straightforward installation and the safe and rapid integration of the large heat pump into the system.
Proven and reliable technology
The control philosophy was adopted from the Vitocal series for detached and two-family houses. Here too, the Refrigerant Cycle Diagnostic System (RCD) checks efficiency continuously and safeguards the efficient and reliable function at any operating point through the interaction between the electronic expansion valve (EEV) and the extensive sensor technology.
With the optional addition of a Vitocom 300 communication module, a comprehensive range of settings and system optimisations can be undertaken from anywhere via internet or mobile phone.
Optimised appliance construction for quiet operation
As is the case for all heat pumps, the compressors emit noise in the 50 to 60 Hz range. Thanks to the high quality construction of the frame and anti-vibration casing components, it has been possible to keep this noise within the casing. Vibrations on the base support are barely perceptible as the 3-D antivibration construction is specifically designed to dissipate oscillations.
Manuals & Brochures
Download
| Heat Pump Brochure
